Editing an Existing Uncertainty Template

Modified on Wed, 4 Aug, 2021 at 9:33 AM

File > View/Edit Uncertainty Templates
To insert a line into the uncertainty template at a chosen point.
1. Select the line on the uncertainty line display grid where the new line should be inserted.
  - The new line is inserted above the selected line.
2. Click “Insert Line”
3. Add the details of the uncertainty line:
  - Source of Uncertainty
  - Limit Value
  - Divisor (from pre-determined list)
  - Ci
4. Click “Save” to save and add the line, or click “cancel” to exit without saving.
5. The new uncertainty line will appear on the uncertainty line display grid.
To edit a line on the uncertainty template
1. Select the line to be edited from the uncertainty line display grid.
2. Click “Edit Line”
3. Amend the details of the uncertainty line as required:
  - Source of Uncertainty
  - Limit Value
  - Divisor (from pre-determined list)
  - Ci
4. Click “Save” to save and add the line, or click “cancel” to exit without saving.
5. The updated details will be displayed on the uncertainty line display grid.
To view the details of an uncertainty line.
1. Select the line to be viewed from the uncertainty line display grid.
2. Click “View Details”
3. The line’s details will be displayed in a read only format.
4. Click “Close” to exit.
To delete a line on the uncertainty template.
1. Select the line to be deleted from the uncertainty line display grid.
2. Click “delete line”
3. Confirm with “yes”, or click “no” to cancel.
4. The line will be deleted, and the uncertainty line display grid will refresh to show this change.